Deep Hunter Pro 3 SE

Golden Mask Deep Hunter Pro 3 SE is a special model from the Deep Hunter line, designed to have the maximum depth of detection possible. It’s based on the Pro3 model, but redesigned electronics and added manual ground balance with multi-turn knob for precise ground balancing and maximum depth. The detector has a switch to switch it to a fully automatic ground balance – for ease of use. The TRASH REJECT function to choose what the detector reacts on – only large targets or all targets, works only in Auto ground balance mode. With this function smaller targets are eliminated and the machine detects only large metal objects. The Trash Reject function is very useful on metal-infested sites, where the prospector would like to search for large targets only.
The Deep Hunter Pro 3 is designed to detect deeply buried large and medium-size metal objects – 5 or more cm in diameter. It could detect smaller targets also, especially with smaller coils. Like all other models from the Deep Hunter range, the Deep Hunter Pro3 SE is a reliable machine for professional use with a discrimination function. The type of the metal objects is identified by two LED lights – red for non-ferrous metals and green for iron. The discrimination is not as good as with the VLF detectors, this is limitation of the PI technology.
WARNING! The Pro3 SE and the Pro3 use newly developed coils that are not compatible with the previous models – Pro and Pro2!
The Deep Hunter Pro 3 SE has a special PLNR (Power Line Noise Reduction) system for comfortable search near 50 Hz power lines. You can order a special “US edition” model, optimized for search close to 60Hz power lines – this frequency is present in the USA and some other countries in North and South America, Saudi Arabia etc.