Now and for the first time in the technology world, the dual antenna came to be released on market, and as the patent’s owner for this antenna, UIG detectors presents for you: The new super antenna system: the fastest, the easiest and the most powerful and to find buried gold and treasures underground. This system works by spiral systems within vast areas that need large distance detectors. This super antenna consists of two transmission circuits (transmitter and receiver) that operate in accordance with the principle of ground induction. The operating antenna: install super antenna on the device in its own place, When the device is running, the transmitter circuit sends a signal to the receiver circuit and the antenna helps the device, by generating a spiral current (Eddy Current), that leads to multiplying the waves more than 1000 times within seconds, to enable the device covers more areas.
System
The techniques and properties of Gold Hunter:The device works in four languages: German, French, English, Arabic. When you select the desired language, you can choose search system from the list before starting: - Treasures and buried gold search system. - Natural gold, veins of gold, gold nuggets and underground mines search system. - Underground Diamonds search system. - Underground Silver search system. - Caves, voids, and underground ancient tombs search system. - Underground Gemstones search system. You can choose the required front range by adjusting the control key, (500 - 1000 - 1500 - 2000 meters). After setting the parameters and starting the process of detecting, the device will start to send and receive special frequencies to detect the target type that you chose from the list. When the device receives a signal, it will automatically track the signal toward the target, then it turns towards the referred target by the sender and the receiver antenna of the signal. After reaching above the target center, the device will wrap in a circular motion that means the device confirmed the target. The depth of the device reaches up to 35 meters under the ground.Gold Hunter device is one of the best German devices with the European CE certification according to international specifications in addition to the international ISO 9001 certificate.
Technical Specifications
Technical Specification Name
Technical Specification Value
Audio Output
piezo buzzer Ø:12mm - H:9.8mm sound pressure level 85db at 12v/10cm frequency 4.5±0.5 kHz
Liquid Crystal Display (LCD)
graphics LCD (128x64) pixel / 55mm x 27.22mm
Length
The device only: 203 mm - The device with the super antenna 398 mm - The device with the long-range antenna 638 mm (opened)
A Multi-System Device for Detecting Underground Gold, Precious Metals, Treasures and Voids
Description
After the tremendous success achieved by GER Detect in cooperation with UIG Detectors on the EASY WAY PLUS device, GER Detect has completely upgraded this device to help prospectors shorten time and distance in finding the target. The world unique and only technology that combines two systems within one device. Specialized in prospecting and searching for gold, precious metals, burials, caves, and voids inside the ground, with confidentiality and ease. The smallest device with a radar sensing system and a 3D imaging system, completely concealable.
Systems
Long-range radar system:GER Detect has invented the first device of its kind in the world with a single handgrip radar sensor system. A grip highly effective with a radar structure characterized with the analysis of radar waves that measure a target’s characteristics. In other words, it is a high-precision dual-frequency radar and a transmitter and receiver of the signals coming from targets. A radar system with a special and sophisticated algorithms integration to detect the location of the target, consistent ability to detect and measure small targets in the ground. The front range in the long-range system can reach up to 2000 square meters, which equals 500 meters in each direction, it also can reach a depth of 18 meters in the ground.
3D Imaging System:This system is designed to avoid errors caused using the long-range system by the prospector and to confirm the existence of the target. After identifying the target with the radar system, you can make a scanning for the detected target with the 3D imaging system. The EASY WAY SMART device has several characteristics:
This system is supported by an Android application that works in several languages, namely: (German - English - French - Italian - Spanish - Arabic - Portuguese - Russian).
Automatic calibration with soil.
Automatic ground scanning feature.
It reaches a depth of 18 meters underground.
EASY WAY SMART device is one of the best German devices with the European CE certification according to international specifications in addition to the international ISO 9001 certificate.
Technical Specifications
Technical Specification Name
Technical Specification Value
Audio Output
piezo buzzer Ø:12mm - H:9.8mm sound pressure level 85db at 12v/10cm frequency 4.5±0.5 KHz
Length
Device (main unit): 145.5 mm
Data processing speed
12 MHz
Operating Temperature Range
0 C° to 70 C°
Operating Humidity Range
up to 95 % non-condensing
Storage Temperature Range
- 20C° to 70C°
Storage Humidity Range
up to 98 % Relative Humidity
Operating Time (7.56 Wh Battery)
10 Hours
Waterproof Rating - Detector
not waterproof (weather proof only)
Bluetooth
HC-06 module - 2.4 GHz radio
Li-ion Battery Technical Specifications
Type
Li-ion Rechargeable Battery - internal battery
Output Voltage
Li-ion 3.6 VDC
Capacity
Li-ion 7.56 Wh
Run Time
10 Hours
Battery Operating Temperature
0 C° to 60 C°
Battery Storage Temperature
- 2C° to 70C°
Electric Li-ion Battery Charger Technical Specifications !!!
Operating Temperature
0 C° to 50 C°
Storage Temperature
- 30C° to 80C°
Input Voltage
90 → 250 VAC 50→60 Hz
USB Output Current
5 VDC / 2000 mA
Car Li-ion Battery Charger Technical Specifications !!!
Input Voltage
11 → 15 VDC
USB Output Current
5 VDC / 2100 mA
Other Technical Specifications
weight total
3550 g
Device weight
230 g
Battery weight
65 g
Bag weight (empty)
2135 g
Bag dimensions
460mm x 175mm x 342mm
Video explaining how the Easy Way Smart Device work
Gallery
Accessories
Accessory Image
Accessory Image
A shock-resistant protective bag made of plastic to carry the device
A Multi-System Device for Detecting Underground Gold, Precious Metals, Treasures and Voids
Description
TITAN 400 SMART device, with a completely new design, besides the device is the first of its kind in the world. TITAN 400 SMART device were developed to operate with ease, in all kinds of soil and the most difficult climatic conditions. TITAN 400 SMART device can bypass all types of mineral rocks with automatic calibration technology, including sedimentary, metamorphic, and igneous rocks, which consist of two types: Granite and basalt, which are among the worst types of rocks that impede the work of many devices in the market, due to the change in the rocks as a result of their chemical interaction with the earth and their transformation into rock tissue, i.e., mineral components This device also has the advantage of automatically switching to search systems once the parts for each system are installed. The front range of the device is 3000 meters square and the depth is 25 meters underground. TITAN 400 SMART works with three different search systems on one device. 1- The long-range search system. 2-The ionic fields’ search system. 3- VLF Electromagnetic Detection System.
Systems
LONG RANGE SYSTEM:This system is characterized by high accuracy in identifying and monitoring the target location and restricting it within a square meter distance. -The device starts searching by showing light signals on the screen to show that the device is sending and receiving signals that direct you towards the target. -When a signal is received, the device will activate three functions at once to confirm the presence of the target -The turning of the signal recipient towards the target directly. -The direction of the target appears on the smart screen. -Making a beep sound when the signal recipient turns towards the target. -Confirm the direction of the target using the four directions to ensure more accurate reach to the target. -Trace the signal and when the signal recipient turns back, this means that you have gone past the target -Narrow the search location by marking it as the center of the target to be confirmed. -Then confirm the location of the target from the four directions (from south to north – from north to south – from west to east – from east to west). Features of this system: A System screen containing: Target direction locating indicator. The front range of the device. sensitivity level. The possibility of choosing the appropriate front range for the search area to be covered (from 100 meters to 500 - 1000 - 1500 - 2000 - 2500 - 3000) square meters. The ability to control the level of sensitivity. The depth in the long-range system reaches 25 meters underground.
IONIC FIELDS SEARCH SYSTEM:It is a system that specializes in detecting ionic fields that form around gold and buried treasures. Search by moving the device from right to left, it should have an angle equivalent to 180 degrees. And when a sound signal is heard and the cursor appears on the screen, this indicates that a target has been discovered. Follow the beep by moving the device up and down When you reach above the target, the device's sound will accelerate to confirm the presence of the target directly under the device This system can also be used while driving a vehicle. The depth in the ionic system reaches 25 meters underground and the front range is 3000 meters.
VLF Electromagnetic Detection System:An advanced automatic (VLF) system with high accuracy in identifying metals, up to a depth of 3 meters underground. A fully automatic operating system that is not affected by soil types: wet or rich in mineral salts or mineral rocks. This system also has: Discrimination and search for precious metals system: This system is characterized by rejecting signals resulting from iron or non-precious targets, allowing you to search for precious metals only (such as gold, silver, bronze, and coins). The general search system, that is, the search for precious and non-precious metals: This system searches for all types of metals with high accuracy, in addition to distinguishing between precious and non-precious metals. The VLF system screen contains several indicators: 1- An indicator of the level of non-precious metals (ferrous). 2- An indicator of the level of precious metals (non-ferrous). 3- A positive (+) button and a negative (-) button to control the sensitivity level. of the search coil. 4-The (x) button to “ignore Iron” This system has a high ability to distinguish metals, whether precious or not, at record time. The front range of the device is 3000 meters square and the depth is 25 meters underground. TITAN 400 SMART device is one of the best German devices with the European CE certification according to international specifications in addition to the international ISO 9001 certificate. This device is designed to function in all countries and regions The true journey of exploration does not necessitate going to new lands, but rather it requires seeing with new eyes.
A Multi-System Device for Detecting Underground Gold, Precious Metals, Treasures and Voids
Description
Five search systems in one device to detect treasures underground such as precious metals and ancient monuments. The world’s first-of-its-kind device that operates five innovative systems to detect underground treasures such as precious metals, ancient monuments, caves, and cavities in the ground. Deep seeker is designed to operate in all kinds of terrain and in the most difficult climatic conditions. Deep seeker can skip all kinds of rocks, including sedimentary, metamorphic fossil, and magmatic rocks, using automatic calibration technology. Magmatic rocks are of two types: Granite and basalt: they are the worst types of rocks that hinder the work of many devices available in the markets, this happens because of the change in these rocks as a result of their chemical interaction with the ground, which turned these rocks into a rock texture, in other words, metal components.
Deep seeker operates on five different search systems in one device:
First: Ionic fields search system
Second: Magnetic metals search system
Third: cavity detection system
Fourth: 3D imaging system
Fifth: Long range system
Systems
Ionic fields search system:It is a system specialized in the detection of ionic fields that are formed around buried gold in the ground. The ionic fields are atomic radiations coming from small particles of gold and buried treasures after having remained underground for so long. -Start the Search by moving the device from right to left, i.e. 180 degrees. -When you hear a beep signal and the cursor appears on the screen, it indicates a target has been detected. -Follow the beep signal by moving the device up and down. -After you reach over the target, the beep signal will accelerate to confirm that the target is directly under the device. -This system can also be used while driving.
Magnetic metals search system:This system is specialized in the detection of magnetic metals such as iron and derivatives, this system allows you to know if there are any non-precious metal underground If there are magnetic metals, the device will make a beep signal over the target with the cursor showing on the screen.
Cavity detection system:Within the metal magnetic system, there is another option: cavity detection. If there is a cavity, the device will make a beep signal over the target with the cursor showing on the screen.
3D imaging system:This system allows you to see the target in its three dimensions in the ground. Make scanning for all the ground layers and show the results as a three-dimensional photo with a detailed report of the depth, size, and shape of the target. -Start scanning by pressing the 3D button in the keypad.
Long range system:This system is characterized by high accuracy in identifying and monitoring the target location and restricting it within a square meter distance. -The device starts searching by showing light signals on the screen to show that the device is sending and receiving signals that direct you towards the target. -When a signal is received, the device will activate three functions at once to confirm the presence of the target -The turning of the signal recipient towards the target directly. -The direction of the target appears on the smart screen. -Making a beep sound when the signal recipient turns towards the target. -Confirm the direction of the target using the four directions to ensure more accurate reach to the target. -Trace the signal and when the signal recipient turns back, this means that you have gone past the target -Narrow the search location by marking it as the center of the target to be confirmed -Then confirm the location of the target from the four directions (from south to north – from north to south – from west to east – from east to west).
Technical Specifications
Technical Specification Name
Technical Specification Value
Audio Output
piezo buzzer Ø:12mm - H:9.8mm sound pressure level 85db at 12v/10cm frequency 4.5±0.5 KHz
Liquid Crystal Display (LCD)
touch screen full color 98mm x 57mm / 480x270 px
Length
Device : 170 mm - Device with imaging and magnetic sensor 700mm (Closed) - Device with imaging and magnetic sensor 1015mm (Opened) - Device with ionic sensor 355mm - Device with long range sensor 310mm.
ood news for the researchers of gold, buried treasures, ancient monuments, graves, caves, and tombs in the ground. Finally the hard work and the random searching are over! we put at your disposal the latest and the best technology, your dream is becoming a reality! You can now find gold, diamonds, gems, buried treasures ancient monuments and cemeteries, archaeological caves and all types of burials underground. TITAN GER -1000 multi-systems to look for underground treasure, contains a complete search station, 5 search systems in one device. GER DETECT company put all the high-tech in this device to be the first in the market, the technical features of this device are a dream for all prospectors and explorers around the world. Our experts developed the TITAN GER – 1000 to solve all the big problems which the prospectors are facing with the devices deployed in the market. Now for the first time, the new technology in this device works with five different search systems, the depth is up to 45 meters underground and 2500 meters front range.
TITAN GER 1000 Detector operates on five different search systems in one device:
Long-range detection system
Ionic fields detection search system
3D imaging detection search system
Magnetometer detection search system
Pulse induction detection search system
Systems
LONG RANGE SYSTEM:This system is very accurate in identifying, discriminating and monitoring the signal and guide you to the target by steering digital screen of the device. When a target is detected, its direction will appear on the screen and the user can walk towards the detected target, even stand up on its exact perimeter, and confine it to an area of 1 square meter. High accuracy in identifying the type of detected metal. You can also select one of the metals in the search process list, such as gold, natural gold, copper, silver, bronze, iron, platinum, diamonds, gemstones, cavity, aluminum or lead. You can determine the front range of the device, starting from 500 meters, 1000 ,1500, 2000, or 2500 meters with a depth of 45 meters under the ground.
IONIC FIELDS SEARCH SYSTEM:Gold, treasures, and burials after being underground for a longtime, they overlap and interact with the soil and the nature of the land and they form magnetic north-south lines and they issue what we call an ionic field. One of the most advanced features of this system, you no longer need long walks and random search in the vast lands: you just need to run the device on the ionic detection system: when you point the device to the ground, the device will emit an alarm sound to confirm the existence of the object then you can move towards the detected target, till you stand in its exact place, then you mark it and confine it to an area of one square meter.
3D IMAGING SYSTEM:Many innovative technical features have been added and developed to this new device: Scanning all the ground layers and showing image from 3 different directions on the screen of the device. Full results to illustrate the target underground from 3 directions, from the side, the bottom and top, to clarify and show everything like gold, metals, buried treasures, caves, spaces, voids, and graves. It shows the depth of all undiscovered targets in centimeters, the device software shows the beginning and end of the target depth.
MAGNETOMETER SYSTEM:This system searches for magnetic metals such as iron, this system allows you to know if there are any non-precious metals underground. The depth of magnetometer system is up to 45 meters underground.
PULSE INDUCTION SYSTEM:The device works on pulse induction system frequency. It penetrates the ground to a depth which is difficult for many other devices to reach. The Best and latest technology of pulse induction systems to detect buried gold, antiquarian treasures, tunnels, caves, and precious coins underground. In addition, there is an automatic calibration feature with the ground to ensure that the device will not be affected with the interference caused by wet soil, metal rock or hard ground.
Technical Specifications
Technical Specification Name
Technical Specification Value
Audio Output
piezo buzzer Ø:12mm - H:9.8mm sound pressure level 85db at 12v/10cm frequency 4.5±0.5KHz
Liquid Crystal Display (LCD)
Pulse induction systems screen: Graphics (LCD) 128 x 64 px - Other systems screen: touch screen full color 98mm x 57mm / 480x270 px
Length
Device: 380 mm - Device with imaging and magnetic sensor 430mm - Device with ionic sensor 565mm - Device with long range sensor 695mm - Device with coil 955 mm (Closed) - Device with coil 1345 mm (Opened)
Frequency
Pulse induction system: 350Hz - Other systems: Max 500KHz
Data processing speed
Pulse induction system: 20 MHz - Other systems: 8 MHz
Operating Temperature Range
0 C° to 70 C°
Operating Humidity Range
up to 95 % non-condensing
Storage Temperature Range
- 20C° to 70C°
Storage Humidity Range
up to 98 % Relative Humidity
Operating Time (54 Watt Battery)
During pulse induction system: 10 Hours - During other systems: 18 Hours
Waterproof Rating - Coil
waterproof to depth of (30 cm)
Waterproof Rating - Detector
not waterproof (weatherproof only)
Bluetooth
HC-05 module - 2.4 GHz radio
Coil
Large coil: Ø=45cm - small coil: Ø=20cm
weight total
8600 g
Device weight
550 g
Bag weight (empty)
4300 g
Bag dimensions
670mm x 500mm x 270 mm
Battery Type
Li-ion Rechargeable Battery - External Battery
Battery Output Voltage
Li-ion 10.8 VDC
Battery Capacity
Li-ion 54 Watt
Battery Run Time
During pulse induction system: 10 Hours - During other systems: 18 Hours
RAYFINDER signal power for long distance location: Powerful 24 volts peak-to-peak transmitter, permits to set detection range levels from 300 m. to 2100+ m.
RAYFINDER signal accuracy: The most stable frequency signal possible. Scan gold and precious metals with frequency accurate down to 0.1 Hz. Find treasure and ignore the trash!.
RAYFINDER ground filters: Before starting the scan, RAYFINDER long range locator senses ground minerals and wetness by displaying GROUND ID numbers. Long range locators of competitors are not smart enough, will either loose depth or give false signals on bad ground. RAYFINDER automatically alters the signal waveform to maintain good depth and metal discrimination for all ground conditions.
RAYFINDER factory and user programs: Modes for gold, silver, copper, bronze, iron, lead, aluminum, diamonds, water, void & 6 free modes for other elements. Unlike other LRL devices the metal frequency is not locked, and can be fine adjusted by the user in +/-1 Hz steps. Place your target sample on the ground to scan for its frequency and “teach” RAYFINDER to locate it. The user frequency settings are stored in memory to be used next time RAYFINDER gold detector powers on.
Long range locators from competitors are simple frequency generators, with locked metal frequencies and not any ability to sense ground conditions. Those frequency generators are not specialized for ground usage, they might operate well in soil with average minerals, but do not penetrate on neutral grounds. Even worse in heavy mineralized soil will give false target signals. The DGB – Digital Ground Balancing feature, programmed in RAYFINDER long range locator to assist the reliable target indication, and maintain maximum range and stable operation regardless of the ground type.
As a second step, the “RAY track” system, completes the ground balancing accurately, by selecting variable waveforms of the transmit frequency to match the various soils. RAYFINDER gold detector long range locator features a worldwide cutting edge technology invention. DFS – Digital Frequency Synthesis. The only long range gold detector on the market with signal output by a DSP microprocessor, which is fast enough to run at 40 MIPS (million instructions per second), performing corrections to frequency accuracy automatically. Every metal has its own specific molecular frequency, up to present day, long range locators were unable to maintain molecular frequency signal stable enough to make visible only the desired target, faults were common practice from minerals and ghost targets due to solar storms and earth magnetic fields.
RAYFINDER GOLD DETECTOR LONG RANGE LOCATOR SIGNAL RECEIVER & POWER MODULE AMPLIFIER
RAYFINDER GOLD DETECTOR LONG RANGE LOCATOR SIGNAL RECEIVER & POWER MODULE AMPLIFIER
Power Module
This unit’s purpose is to power the antenna rods. This way the system is not self-potential.
Power module contains a 9V DC battery for a power supply. By increasing user conductivity, the power module permits everyone to be a successful user.
Power module features a new Weight Check Control (W.C.C)
The power module can determine a target’s weight after a target signal line has been verified. The weight check is controlled by a rotary knob on the power module. Set low amplification and only large quantities in kilograms are located. Select high amplification and smaller quantities corresponding to grammars also are realized.
RAYFINDER GOLD DETECTOR LONG RANGE LOCATOR SPECIFICATIONS
16 bit processor 40 MIPS speed – 160 Mhz clock
32 bit DDS synthesizer chip to output waveforms
Digital frequency synthesis x 20 PLL frequency generator with auto 0.1 Hz frequency stabilizer
Geophysical – uses ground probes for resistivity data collection. For large metal detection, void location with graphical separation of metal targets from voids and other geological features. Geophysical system comes with 4 probes as standard or optional 22 probes.
Magnetometer – a super sensitive 80 cm. gradiometer probe reveals soil magnetic field disturbances caused by voids, ferrous metals, foundations, walls
Metal detector – portable for quick scan, pinpointing and selective rejection of non-valuable metal targets.
GROUND RADAR WITH REAL TIME IMAGING
No time lost to scan the area and download data to a computer to visualize the finds. When walking around with the magnetometer, the metal detector or while moving the probes the GEO EXAMINER 3D metal detector ground radar displays scan images immediately. Professional users can also use filters to clear the images manually by adjusting the target strength from the background soil minerals.
SELECT THE BEST SWEEP DIRECTION
According to the starting position, field shape and obstacles on your way, 8 sweep directions are offered to select the most suitable for scanning the field. Unlike other systems the user is not limited to search only from right to left. Input to the GEO EXAMINER ground radar, the number of sweep lines and steps per line you estimate are needed to cover the area. GEO EXAMINER will guide you to step or to turn to the next sweep line with voice commands!
2 DATA COLLECTION MODES MANUAL OR AUTO
For uneven ground a standard pace cannot be maintained, select manual mode, and as you step or move the probes (depending the mode used), click on “CAPTURE” and see what is found. On flat ground use auto mode, input to the GEO EXAMINER the time (seconds) needed for your stepping. Click “START” and the computer gives voice & visual signals to step, turn or finalize the survey. Your ears prompt to step, turn or stop while the eyes see the results immediately. If obstacles are encountered on the way, trees or rocks pause the data logger, pass the obstacle and restart.
THE REPLAY TOOL ASSURES THAT NO TARGET IS LEFT BEHIND
A stored image to GEO EXAMINER hard drive, can be imported back anytime to be viewed using the “replay” function. Relax at the comfort of your home and select “replay” to see the scan step by step again on the GEO EXAMINER screen. GEO EXAMINER imitates the exact steps, sweep direction and data view of the original survey. The “replay” is a unique GEO EXAMINER feature. The screen goes blank and just like a puzzle the image reappears.This is not only a “video” of the original data capture. Use “replay” tool to compare scans from different sweep directions and GEO EXAMINER modes on the same site, to validate your target. Often small but valuable targets lying near big ones are masked. The “replay” guarantees that a weak response of either a small or a very deep target will be clearly viewable, then as the “replay” continues and the big target is encountered the smaller will fade. It is up to you to investigate again the suspected spot, leave the big target out of your new scan, selecting other sweep direction and compare the images.
GEO EXAMINER 3D metal detector ground radar makes the full target image analysis and depth calculation on the field. No need to transfer data files to a laptop to get higher resolution images, no additional costs for special software.
Display: 10.1” LED, 1280 x 800
Processor: INTELL Core Atom
Input device: Resistive touch screen
Operating system: Windows 10
Working memory: 2 GB
Data memory: 64 GB HDD
Feedback: Voice commands, visual
Dimensions & weight: 250 mm x 180 mm x 50 mm / 1200 grams
Αccessories: AC/DC adapter, Power Cord, Protective bag
Safety Certification: CE
Battery: Lithium polymer, lasts up to 9 hours
With external battery up to 15 hours
Charging Time (Battery fully discharged): ca. 1 Hours
Leather carry bag and neck straps
3 INTEGRATED SYSTEMS
-Geophysical ground resistivity locator,
4 probes mode as standard & 22 probes system accessory.
Manual ground rejection.
Magnetometer with gradiometer 80 cm probe.
Automatic ground rejection.
3D Metal Detector with discrimination. Manual ground rejection.
COMPUTER CONTROLLED DATA SCAN MODES
Auto scan: Readings are captured automatically at intervals selectable from 1/sec to 100/sec
Manual scan: Using the capture key.
Real time data graphics for both modes.
ADDITIONAL EQUIPMENT
Geophysical 22 probes system. Includes module, 22 probes, 2 x 17 m. long multi cables.
Magnetometer in hard carry case.
Metal Detector in hard carry case.
AMBIENT TEMPERATURE
20 to 55 C
COMPUTER CONTROLLED DATA SCAN MODES
Auto scan: Readings are captured automatically at intervals selectable from 1/sec to 100/sec
Manual scan: Using the capture key.
Real time data graphics for both modes.
STANDARD EQUIPMENT
GEO EXAMINER Computer
Interface with USB cable
Geophysical locator with 4 probes / cables in watertight case
Software and hardware driver CD
DATA PROCESSING
On site real time 2D / 3D target presentations, interpretation, modeling, replay, exporting to bmp, jpg, metafile, png and data file formats, printing
DATA POINT DENSITY
Dependent on step length, distance between measured profiles and system used: 5 cm to 10 m.
RESOLUTION
10 Bit / 5V
DEPTH*
Geophysical : 1 – 30 m.
(increases with the distance between the probes)
Magnetometer: 6 m.
Metal Detector: 2 m. *dependent upon target size
COMPUTER CONTROLLED DATA SCAN MODES
Auto scan: Readings are captured automatically at intervals selectable from 1/sec to 100/sec
Manual scan: Using the capture key
Real time data graphics for both modes.
FREQUENCY RANGE
Geophysical locator: 137 Hz
Magnetometer: +/- 50,000 nT
Metal Detector: 25 KHz
DATA POINTS
10.000 scans per survey, ability to store unlimited data files on hard disk
Geo Examiner locator processes digitally the signal from pairs of transmitting & receiving probes continuously. When using probes, the signal is electrical, induced direct into the ground. GPR ground radars and VLF metal detectors at the opposite have electromagnetic wave type of signal that is transmitting aerial, towards the ground, therefore loses in penetration ability occur as it is absorbed from ground minerals – wetness. The Geo Examiner electrical signal provides more effective ground coverage compared to the metal detectors, much like X rays, scanning completely the area between the probes. Once Geo Examiner signal meets ground resistance, it is attracted by the route of least resistance to travel from the transmitter to receiver probes. If masses of gold / precious metals are found in the signal path, they attract the signal as good conductors, producing low electrical resistance. Ground voids, tombs due to the traped air and dug ground, are bad conductors and produce high electrical resistance to Geo Examiner signal. The resistivity signals are converted to low data for metal targets and high data for voids on the screen. Older geophysical detectors operated with single transmitter / receiver probe, resulting to poor resolution. With Geo Examiner the signal outputs from 2 transmitters towards 2 receivers. The software processes an average from the 2 received values, and optimized depth, sensitivity and detection for difficult targets is achieved. Before starting the scan, the user zeroes the ground data, for example the mineral and wetness readings, so their resistivity value is displayed as zero and does not interfere with the scan. Geo Examiner signal amplifier has 8 gain levels, for professional users to select the stronger according the soil level of difficulty.
22 PROBES GEOPHYSICAL
To operate Geo Examiner 22 probes mode, it is necessary to acquire the accessory 22 probe system, module and 2 multi cables as shown. Select 22 PROBES, click START and Geo Examiner scans and visualizes automatically within 20 sec’s underground data from 11 probes on each of the 2 multi cables. The advantage of acquiring data from many scan points, increases the image resolution and speeds up the scan process. To compare, the 4 probe geophysical detectors require a lot more time for scanning the same area, and the scan image is not accurate. The ability of surveying using multi probes can be found to more expensive, bulky and complex 3D ground radar locators than the Geo Examiner.
GEO EXAMINER MAGNETOMETER MODE
The soil magnetic components or «iron oxides», have been created at the time when earth was a burning magma. They were stabilized aligned towards the magnetic north direction, that changes according the geological periods. Magnetic field is a “frozen” compass that varies in strength and orientation with different areas and materials, hence it can be measured. Human constructions distort the natural soil magnetism by creating stronger or weaker magnetic materials. For example a void, ferrous metals, stone foundations, ceramic brick walls, a ceramic vase, a pit and in general objects or constructions originated by fire or those that have been fired or burned, show variations from the natural soil magnetic field. Also the ground surface is by nature more magnetic than the subsoil, since it receives for million years rain and heat – both factors that enhance the magnetic components. As a result every human excavation distorts the top soil magnetic components, generating a change to the local magnetic field. The GEO EXAMINER gradiometer probe consists of dual magnetic field sensors, positioned in line at 80 cm apart for increased sensitivity. The scan is been carried out on normal pace with real time data capture and visualization.
The Geo Examiner metal detector has a simple operation, a “SENSITIVITY” ground tuning knob to cancel the interference from minerals, a “RESET” key to adapt to the changes of the ground conditions and a “DISCRIMINATION” control to reject trash targets. The metal detector produces various color tones to differentiate between the rejected and the accepted targets. The graph displays information of all metal targets, and the user can view the unwanted targets, like iron, foil, in blue and precious metals (gold for example) in red. The detector head can be swept right and left, according the selected sweep direction. At every step it should be hold motionless above the new piece of ground to scan and visualize correctly. The Geo Examiner metal detector uses the “transmit / receive” coils technology like all metal detecting systems, but the signal procession is been carried out on the computer software. This way the weakest signals produced by the detector coils are amplified by the computer and presented as colorful 3D graphics. Deep targets have very low signal responses that are missed by the limited performance of the detector circuits. Targets that would be missed with an ordinary metal detector either because the signal was weak or even not heard at all, are indicated clearly by Geo Examiner. It is so sensitive, that even geological features like voids and man-made structures, may be visualized at some degree.
VANQUISH 440: built for the detectorist looking to step up their game. Armed with Multi-IQ technology, waterproof V10 coil, and audio control, the 440 also features pinpoint mode. Perfect for those who demand precision. As simple as it is powerful, the VANQUISH 440’s compact and lightweight construction delivers results — no matter where the hunt takes you.
SIMULTANEOUS MULTI-FREQUENCY
Why Multi-IQ? Because with Minelab’s revolutionary Multi-IQ technology, you’ve got the combined power of multiple detectors in one — all working for you at the same time. Simply turn on and go. Nothing goes undetected and no terrain is off limits. Silver, gold or jewellery. Park, field or beach. Unearth the power of VANQUISH with Multi-IQ.
ALL-TERRAIN
No matter what you seek, VANQUISH has you covered. Simply select one of the four Search Modes — Coin, Relic, Jewellery, or Custom — then start swinging. Each mode is pre-programmed and optimised to give you the best performance, anytime and anywhere: park, field or beach. You can even save your favourite settings to a custom Search Mode.
VANQUISH welcomes tough terrain. It dominates at the beach in wet sand and salt water, outperforming other detectors that can’t compete. 12 discrimination segments deliver control over what metals you want to accept or reject.
Minelab EQUINOX 800 Metal Detector with 11" Double-D Smart Coil and Bluetooth Headphones with WM 08 Wireless Module.
The EQUINOX 800 Metal Detector with Multi-IQ technology, redefines all-purpose detecting for beginners to serious enthusiasts. Adaptable for all target types and ground conditions makes the 800 a true turn and go metal detector.
The EQUINOX 800 Gold mode is designed to enhance performance on small gold nuggets in mineralized ground. It does so primarily by using different audio processing so that targets respond both in volume and pitch. The Gold Mode will be of interest to gold prospectors, but has less application for other uses. More to the point, Multi-IQ is so good in both Park 2 and Field 2, that these profiles are as good if not better, at finding gold nuggets, than many dedicated single-frequency gold detectors! People who regularly detect for gold nuggets will likely want the EQUINOX 800.
The EQUINOX 800 adds the ability to shift non-ferrous tones and volumes, which can be helpful for those who hunt strictly by ear. These options can also be an aid to those with extreme hearing loss in a particular audio range.
The other big difference between the EQUINOX 600 and the EQUINOX 800 is the “Advanced Settings” that allow for a finer degree of tuning on various options. The EQUINOX 800 has eight levels for finer tuning in the densest "carpet of nails" scenarios. The low settings offer more solid hits on very deep targets, but poor separation of closely adjacent targets. The high settings have great separation, but the clipped audio responses required in dense trash make it harder to hear very deep targets.
The EQUINOX 800 has a User Profile button that allows the operator to jump straight to an alternative Detect Mode. For example, to get from Park 1 to Beach 1 it only takes four pushes of the Detect Mode button to cycle through. You can also program an extra User Profile to get there in one button push. The EQUINOX 800 also has Low, Medium, High, or Off back-lit settings for the heavy users who want to conserve energy consumption.
The EQUINOX series both have automatic Noise Cancel but the 800 also offers a Manual override. If you hunt in areas of high electrical interference (EMI), or around lots of other detectors, this might be helpful in finding the quietest setting with the least interference. Automatic is great and most people will never use Manual.
Minelab SDC 2300 Gold Metal Detector with 8" Round Mono Search Coil Plus FREE Metal Detecting & Treasure Hunting Accessories
They say the best things come in small packages! This is certainly true for the SDC 2300. It’s compact, waterproof and built to perform in the toughest conditions. Undiscovered gold patches on land and underwater won’t stand a chance when using the Minelab SDC 2300 gold detector. The SDC 2300 is a high performance mid-range gold detector, perfect for chasing down those elusive sub-gram nuggets both on land and underwater. From Minelab, the company that knows Gold, this compact waterproof gold detector comes with easy-to-use controls and is assembly-free! Let the versatility of the SDC 2300 open up a whole new range of possibilities for finding more gold nuggets!
Features:
Warranty : 3 Year Limited
Total Weight : 5.3 lbs (2.4 kgs)
Technology : Pulse Induction (MPF)
Waterproof : Fully Submersible up to 10 Feet (3m) of Water
Rugged & Assembly Free : Military Grade Construction, One Piece Detector Designed to Perform in the Toughest Conditions
Easy Patch Hunting : Search Quickly and Efficiently in Hard to Reach and Remote Places to Find Elusive Gold Bearing Clustered Deposits
Product highlights
Total Weight : 5.3 lbs (2.4 kgs)
Frequency : Pulse Induction, Multi Period Fast (MPF)
Warranty : 3-year warranty
Waterproof : Fully Submersible up to 10 Feet (3m) of Water
Battery Type : C Cell 4 x 1.5V Alkaline (supplied), 1.2V NiMH, 1.2V Ni-Cad
Battery Life : 6 to 8 hours
Threshold : 9 Audio Levels
Ground Balance : Automatic Ground Tracking (AGT). Fast Ground Balance
Headphones : Wired 1/8" (3.5 mm) headphones included
Included Accessories : Getting Started Guide, Rain Cover, Armrest Strap, V12 Skidplate
Minelab VANQUISH 540 Metal Detector: for the serious detectorist who demands ultimate performance. As if Multi-IQ technology, audio control, and pinpoint wasn’t enough the 540 also boasts iron-bias control, red LED backlight and rechargeable batteries. What’s more, it comes with a waterproof 12” coil as standard for greater depth. No matter where the hunt takes you, the 540 is the ultimate detector that lets you detect on your terms.
SIMULTANEOUS MULTI-FREQUENCY TECHNOLOGY
Why Multi-IQ? Because with Minelab’s revolutionary Multi-IQ technology, you’ve got the combined power of multiple detectors in one — all working for you at the same time. Simply turn on and go. Nothing goes undetected and no terrain is off limits. Silver gold or jewellery. Park, field or beach. Unearth the power of VANQUISH with Multi-IQ.
ALL METALS. ALL SOILS. ALL THE TIME.
ABOVE GROUND No matter what you seek, VANQUISH has you covered. Simply select one of the four Find Modes — Coin, Relic, Jewellery, or All Metal — then start swinging. This machine is not waterproof but the coil is. Each mode is pre-programmed and optimised to give you the best performance, anytime and anywhere: park, field or beach. You can even save your favourite settings to a custom Find Mode.
VANQUISH welcomes tough terrain. It dominates at the beach in wet sand and salt water, outperforming other detectors that can’t compete. 25 discrimination segments deliver ultimate control over what metals you want to accept or reject.
PACK & CARRY 1.3kg (2.8 lbs) light with a unique collapsible snap-lock system makes it easy to pack and go.
IRON BIAS
More treasure, less trash. Adjustable Iron Bias control lets you switch between High (default) and Low.
INCLUDED V12 COIL
Cover more ground and search deeper with the V12 12”x9” V12 coil included as standard.
AUDIO CONTROL
Automatic noise cancelling, lag-free audio response and 10-volume settings put you in control.
WATERPROOF
Waterproof coils up to 1 m (3.3 ft) and Water Resistant control pod (with included Rain Cover
PINPOINT MODE
Included pinpoint mode to help you locate targets with extreme precision.
The World's Most Popular Pinpointer Just Got Better!
From the trusted metal detecting experts at Garrett comes the new Pro-Pointer II! This top-quality pinpointer is packed with all-new features such as a lost pinpointer alarm, auto shut-off, a molded lanyard attachment clip, increased durability and sensitivity, and faster re-tuning capability to quickly eliminate feedback from mineralized soil, saltwater, and other environmental factors. Don’t waste your time and miss out on valuable coins and other treasures—equip yourself with this Pro-Pointer II and get hunting!Specifications
Water Resistant : The Pro-Pointer II Can be Washed in Running Water or Used in the Rain
Automatic Tuning : Microprocessor Circuitry Insures Maximum Sensitivity with No Tuning Necessary
Lost Pinpointer Alarm : After 5 Minutes without a Button Press, the Pro-Pointer II will Begin to Emit Warning Chirps for 60 Minutes
Auto-Off Feature : After 60 Minutes (one hour) of Warning Chirps, the Pro-Pointer II will Power Off Automatically to Save Battery Life
Lanyard Attachment Clip : Now Molded into the Outer Shell to Attach the Pro-Pointer II to your Belt, Digging Pouch or Metal Detector (attachment ring not included)
The Minelab E-TRAC is the most technologically advanced detector incorporating unique FBS technology and smartfinddiscrimination . Its sleek, sturdy design, innovative control panel, intuitive menus, clear LCD screen, robust lightweight coil and comprehensive targeting options set the E-TRAC apart from any other detector available today.
Minelab has taken the groundbreaking step of incorporating a USB interface – the E-TRAC Xchange . This enables you to connect your metal detector to your home computer to download and upload your E-TRAC settings, user modes and discrimination patterns. There are a number of sample patterns you can try located on the specifications page. You can build a resource library charting your success with your E-TRAC storing your valuable settings for your favorite sites – never worry about losing your most successful settings again! This advanced feature is also designed to allow you to quickly configure the E-TRAC at the touch of a button to particular detecting environments and preferred targets so you can spend less time messing about with settings and more time out in the field doing what you love doing, detecting.
When it comes down to it the E-TRAC will locate valuable metal objects in a variety of mineralized ground conditions such as extremely salty soils, seawater, wet beach sand and highly magnetic ground conditions. By using the E-TRAC you can become one of the many successful detectorists who combine their passion for the outdoors with the excitement of discovering valuable coins, relics, gold and jewelry on a regular basis.
Factory Included Accessories
USB 2.0 Cable
UR-30 Headphones
110V NiHM Wall Charger
Detector Stand
11 DD Search Coil Cover
8AA Battery Holder
NiMH 1600mah 9.6V Battery Pack
E-Trac Xchange Software
Features:
Utilizing FBS technology with simultaneous frequencies ranging from 1.5kHz – 100kHz the signal received from the detectors coil is analysed from a wide range of responses. This allows E-TRAC’s advanced signal processing to analyse more target information so that target identification is more accurate.
E-TRAC Xchange USB functionality – create, download and upload your favorite E-TRAC settings and save them to your computer or Xchange them with friends by email.
Quickmaskwith independent ferrous and conductivity rejection level adjust – a fast and simple way to edit patterns.
Smartfind- a unique two-dimensional scale of discrimination graphically representing both the ferrous and conductivity properties on the same display working to eliminate signals from undesired targets and accepts signals from desired targets.
Discrimination scale with radical realignment improves target ID and the recovery rate of good targets at depth.
Four pre-programmed Minelab user modes for switch on and go detecting with specific Settings and Patterns suited to Coins; High Trash; Beach and Relics.
Four user mode slots so you can personalize modes to suit your specific target preferences and detecting environment.
Refined threshold adjustment level on a 1-50 scale for greater precision to suit your requirements.
Pinpoint with audio and visual indicators on two modes making target size and identification more accurate than ever.
Ground Setting options of Neutral and Difficult allowing you to adapt easily to benign or the most challenging operating conditions.
Trash Density settings – High ensures you experience fewer false signals in high trash environments while Low is perfect for cleaner sites.
User-centered keypad and menu design – fast and easy to use with intuitive icons and logical menu sequences.
Clear resolution visual display panel 72mm x 48mm – designed for optimum visibility in all light conditions.
Ergonomic, perfectly balanced Handle Assembly ensures longer periods of detecting without fatigue!
Ultra-lightweight waterproof 11″ Double-D waterproof coil for versatility with sharp, accurate pinpointing and depth.
Feauturing revolutionary new technology that is going to change the Gold detecting industry forever! Just take a look at the new features!Extreme Gold DepthSo how deep can you go? Well, up to 40%* deeper than the GPX series. Old gold fields are new again, thanks to the revolutionary new ZVT technology. Minelab takes you much deeper than ever before!Maximum Gold SensitivityThe incredible sensitivity of the GPZ 7000 with the Super‑D coil gives you the ultimate advantage in the field. Find gold others have missed, from sub-gram gold through to those elusive ‘retirement nuggets’ still out there.Precision Ground BalanceMost gold is buried in the mineralised ‘difficult’ ground that many detectors can’t cope with. The GPZ 7000 accurately ‘balances’ and automatically ‘tracks’ to even the most severe ground conditions, with ease.Enhanced Noise ImmunityThe outstanding noise immunity of the GPZ 7000 enables very smooth and quiet detecting. With 256 Noise Cancel channels, the GPZ 7000 picks up less atmospheric noise. Listen to the gold, not the noise interference!Simple Menu SystemThe easy-to-use Menu Pages group similar functions together under Detect and Map sections, with all settings quickly accessible. Use the Guide Sequences to get started. You don’t need to be an expert to find gold!Wireless Audio FreedomDetect without your headphones attached to the detector. With the WM 12 Wireless Module you have the choice of using the in-built speaker, the supplied headphones, or your favourite headphones.GPS Locating & PC MappingSee your location and log gold finds as you detect. With the built-in GPS you’ll efficiently cover more ground and won’t miss a nugget! Record your favourite ‘hot-spots’ by saving data to XChange 2 with Google Maps.Waterproof Coil to 1 m (3 ft)The GPZ 14 coil is waterproof and submersible to a depth of 1 m (3 ft). You can easily detect rivers and shorelines with no fuss! The weatherproof design of the GPZ 7000 allows you to go detecting in rainy or wet conditions.
The GPX 5000 sets a high benchmark in gold detecting technology. Featuring Minelab’s exclusive technologies, Multi Period Sensing (MPS), Dual Voltage Technology (DVT) and Smart Electronic Timing Alignment (SETA), the high performance GPX 5000 is extremely capable of finding more gold than other brand detectors. From sub-gram nuggets to the elusive ‘retirement nugget’ and everything in between, with the GPX 5000, you can find it.
Using unique features, functions and industry leading patented technology ensure the GPX detectors run smooth and quiet in even the most severe ground conditions, whilst still maintaining excellent depth and sensitivity to gold nuggets.
The 8 Timings available on the GPX 5000 change the digital switching and processing of the electronics in the detector. Each Timing has been designed for optimum performance under certain conditions, so it is like having a different detector each time you select a new Timing.
Also great for the specialist relic and jewellery hunter who demands the best, and wants to recover targets deeper than ever before.
Easy for the beginner through to the professional – you can switch on and go with six factory preset Search Modes and automatic functions.
Features:
MPS, DVT & SETA Technology
8 Timings make the GPX 5000 very versatile. It’s like having 8 detectors in 1. In addition to five of the Timings found on the previous model the GPX 5000 introduces three new Timings: Coin/Relic, Salt/Gold and Fine Gold.
Fine Gold Timing gives even more depth and sensitivity than Enhance — bring home more nuggets even from ground thought to be completely worked out!
Salt/Gold Timing is great for all nugget sizes in salty ground — outstanding at the beach!
Coin/Relic Timing is the deepest ever for benign ground conditions.
Improved Enhance Timing for more depth
Improved electronics for increased target sensitivity and ground balance performance
Six preset Search Modes gives you easy switch on and go detecting. In addition to General and Deep search are: Hi-Mineral, Patch, Hi-Trash and Pinpoint. All six Search Modes can be modified to your personal favourite settings. Menu accessible Search Modes can also be renamed.
Increased Rx Gain adjustment allows you more precise sensitivity control for optimum performance.
Automatic Ground balance options make it easy to adjust the detector to suit all ground conditions. e.g. (Fixed, Tracking, Tracking speed, Ground Balance Type, Quick-Trac button).
Audio adjustments to maximize target signals for your personal hearing ability e.g. (Threshold, Tone, Audio Type, Signal Peak, Response, Target Volume, Volume limit, Stabilizer).
Iron Reject adjustable to suit the iron trash level where you are detecting.
Motion control, adjustable to match your sweep speed and optimise target responses.
Tune (also known as Noise Cancel) – Automatic and Manual options to minimize electrical interference.
Backlight so that you can read the LCD menu in any light, allowing you to detect day or night. The back light also has an adjustable timeout to help preserve battery power.
Lightweight Li-ion Battery with inbuilt Speaker Booster capability
Two coils as standard: 11” Double-D coil plus 15 x 12-inch Monoloop coil giving you added versatility and value.
Minelab GPX 5000 Metal Detector with 11" DD Coil and 15x12" Mono Coil Search Coil Plus FREE Metal Detecting & Treasure Hunting Accessories.
The GPX 5000 sets the new benchmark in gold detecting technology. With an amazing range of features and functions, the GPX 5000 is not only superior to its predecessor, the GPX-4500, but is in a class of its own. Featuring Minelab’s exclusive technologies, Multi Period Sensing (MPS), Dual Voltage Technology (DVT) and Smart Electronic Timing Alignment (SETA), the high performance GPX 5000 is capable of finding more gold than ever before. From sub-gram nuggets to the elusive ’retirement nugget’ and everything in between, with the GPX 5000, you can find it.
The high performance GPX 5000 metal detectors is capable of finding more GOLD than ever before - from sub-gram nuggets to ’retirement nuggets’ and everything in between! NEW improved electronics, NEW Soil/Timings and an amazing range of features combined with the legendary GPX ability to see through ground mineralization sets a new gold detecting benchmark.
Using unique features, functions and industry leading technology ensures the GPX 5000 detectors run smooth and quiet even in the most severe ground conditions, while still maintaining excellent depth and sensitivity to gold nuggets. Serious detectorists know that GPX 5000 detectors find gold much deeper than ANY other detector, in ALL ground conditions. That’s why we are confident to say we have the GPX 5000 Depth Advantage.
Easy for the beginner to old pros - you can switch on and go with factory preset Search Modes and automatic functions. Serious detectorists know that GPX detectors find gold much deeper than ANY other detector, in ALL ground conditions!
Features:
Warranty : 3 Year Limited
Total Weight : 5.3 lbs (2.4 kgs)
Technology : Bi-Level, Advanced Pulse Induction
Discrimination Control : Eliminate or Tune Out "Junk" and Unwanted Targets
Dual Voltage Technology (DVT) : Ensures an Accurate Ground Balance to Provide Maximum Sensitivity and Depth in All Ground Types
Smart Electronic Timing Alignment (SETA) : Ensures Threshold Stability is Improved and Maintained, Allowing you to Operate the GPX 5000 with Maximum Efficiency Under All Conditions
Golden Mask 6 is an all-purpose VLF metal detector that runs at 3 frequencies: 5, 15 or 30 kHz. With these three frequencies, all your needs will be perfectly covered - 5 kHz for relics, treasures, hoards; 15 kHz for coin shooting and general use, and 30 kHz for gold prospecting, tiny gold jewelry or other hard-to-detect metals and targets. Combined with the new Fighter S search coil, this is a real all-round machine to cover every style of prospecting on any type of soil - from non-mineralized, to very mineralized. The detector electronics are improved and the detector performs great at all three frequencies. You will be able to go deeper and achieve better productivity on the field, in the forest or on the beach. In this model Golden Mask implements for the first time a real menu system with user-modifiable presets. This way you can quickly switch for example from "coins" to "relics" with only two button clicks. You can modify the presets (called "programs" in the menu), and if you mess with the settings, you have the option to quickly revert to the factory values. The Golden Mask 6 uses the same telescopic shaft as the previous model. Wireless functionality is implemented as a standard. There is a LITE version without wireless functionality for clients on tight budget. The control block of the Golden Mask 6 is rain-proof - you cannot submerge it, but you can keep using the detector under rain. The menu is en English only.
Golden Mask Deep Hunter Pro 3 SE is a special model from the Deep Hunter line, designed to have the maximum depth of detection possible. It's based on the Pro3 model, but redesigned electronics and added manual ground balance with multi-turn knob for precise ground balancing and maximum depth. The detector has a switch to switch it to a fully automatic ground balance - for ease of use. The TRASH REJECT function to choose what the detector reacts on - only large targets or all targets, works only in Auto ground balance mode. With this function smaller targets are eliminated and the machine detects only large metal objects. The Trash Reject function is very useful on metal-infested sites, where the prospector would like to search for large targets only. The Deep Hunter Pro 3 is designed to detect deeply buried large and medium-size metal objects - 5 or more cm in diameter. It could detect smaller targets also, especially with smaller coils. Like all other models from the Deep Hunter range, the Deep Hunter Pro3 SE is a reliable machine for professional use with a discrimination function. The type of the metal objects is identified by two LED lights - red for non-ferrous metals and green for iron. The discrimination is not as good as with the VLF detectors, this is limitation of the PI technology. WARNING! The Pro3 SE and the Pro3 use newly developed coils that are not compatible with the previous models - Pro and Pro2! The Deep Hunter Pro 3 SE has a special PLNR (Power Line Noise Reduction) system for comfortable search near 50 Hz power lines. You can order a special "US edition" model, optimized for search close to 60Hz power lines - this frequency is present in the USA and some other countries in North and South America, Saudi Arabia etc.
Golden Mask Deep Hunter Pro 3 is a pulse induction (PI) metal detector with fully automatic ground exclusion balance (AGEB). The electronics were redesigned to achieve both superb performance and ease of use. A new TRASH REJECT function was added, so now the user is able to choose what the detector reacts on - only large targets or all targets. With this function small trash object could be eliminated and the machine reacts only on large objects. The Deep Hunter Pro 3 has simple and intuitive controls. It is designed to detect deeply buried large and medium-size metal objects. The ground balance is set automatically only - the machine tracks the ground in real time, the user is not required to set the ground balance. Like all other metal detectors from the Deep Hunter range, the DHP3 is a reliable machine for professional use. The type of the metal objects is identified by two LED lights - red for non-ferrous metals and green for iron. WARNING! The Pro 3 uses newly developed coils that are not compatible with the previous models! The coils for Pro 3 will work only on a Pro 3 and newer models! The Deep Hunter Pro 3 metal detector is optimised for comfortable search near 50 Hz power lines. There is a special "US edition" model, optimised for search close to 60Hz power lines - this frequency is present in the USA and some other countries in North and South America, Saudi Arabia etc.
Golden Mask Deep Hunter Pro 5 is a renovated version of the Pro3. All functions and controls are the same, but the Pro5 has around 10% more depth, compared to the Pro3, the front panel was also updated and now this model uses the same aluminum panel as the top model Pro3 SE. This pulse induction (PI) metal detector has fully automatic ground exclusion balance (AGEB) and this makes the detector very easy to use, even absolute beginners can use it with great success. The electronics were redesigned to achieve both superb performance and ease of use. Stability was also improved thanks to the use of military-grade electronic parts. The Pro5 features a TRASH REJECT function, so the user is able to choose what the detector reacts on - only large targets or all targets. With this function small trash object could be eliminated and the machine reacts only on large objects - very useful on former settlements or other places with lots of junk. As all other models from the Deep Hunter range. the Deep Hunter Pro 5 is designed to detect deeply buried large and medium-size metal objects. The ground balance is set automatically only - the machine tracks the ground in real time, the user is not required to set the ground balance. The type of the metal objects is identified by two LED lights - red for non-ferrous metals and green for iron. The Pro 5 uses the same coils as the Pro 3 and the Pro 3SE! The Deep Hunter Pro 5 metal detector is optimized for comfortable search near 50 Hz power lines. There is a special "US edition" model, optimized for search close to 60Hz power lines - this frequency is present in the USA and some other countries in North and South America, Saudi Arabia etc.
This system has a high ability to distinguish metals, whether precious or not, at record time.
